Differences

This shows you the differences between two versions of the page.

--- namespace:speaker_directivity_and_room_eq [2026/01/03 01:14] – [Speaker Directivity and Room EQ] tim
+++ namespace:speaker_directivity_and_room_eq [2026/01/21 02:23] (current) – [Speaker Directivity and Room EQ] tim
@@ Line 26: / Line 26: @@
 It turns out that I can't seem to get a sound I really like that makes much sense in terms of ancehoic on axis response being prefectly flat for each driver. I'm not sure why, but it always seems best if I don't EQ the speaker drivers, but only set the crossovers and adjust their levels by ear. The end result in this room is a fairly steep room curve as noted earlier, but with some specific frequency cut backs as a room treatment.
+Update January 20, 2026
+Somehow I now am EQing the drivers flat fairly nearfield and I am liking the sound. I should never be a speaker reviewer. I don't know if it's my perception that changed or what but now I'm liking the sound with the coaxial tweeter EQ'd flat on-axis measured at 2 meters and crossed over all the way down at 600 Hz to the mid-horn, which is also EQ'd flat from it's 600 Hz crossover down to about 130 Hz. I don't understand what changed, but now at least this makes some sense. It actually sounded prettty good with a large overlap between the mid and tweeter, covering from about 1000 Hz to 5000 Hz working together. It was a little crunchy sounding at times but very present and lively and not strident or overly sibilent. Not perfectly neutral but very easy on the ears and worked well for me with everything I listened to. With the 600 Hz crossover I avoid dips in the off-axis response. Instead the off-axis starts sloping down at about 700 Hz or so in a straight line. This also sounds good. Not quite as punchy and intense but seemingly smoother, less colored.